The material of the side arc milling cutter is mainly single crystal diamond, the surface finish of the processing effect is high, the cutting edge is sharp and precise, 

the workmanship is fine, and the diamond material with high hardness and high wear resistance is used. , The processed effect is a pure mirror surface, no polishing 

is required, and large-grained diamonds are used, which has high durability.

Now let me tell you how to improve the surface finish of the workpiece processed by the side arc milling cutter. It is necessary to choose a machine tool with high 

precision and low vibration, and use a high speed. Single crystal diamond cutting tools can only be used in finishing machining, and the finishing allowance should be less, 

and the cutting amount should be controlled at less than 5 wires. It is also necessary to choose a suitable special coolant. During use, if the insert is not sharp, it must be 

returned Factory grinding and reuse.

The side arc milling cutter can be used to process hardware parts, auto parts, handicraft products, mobile phone metal buttons, mobile phone casings, digital product casing 

frames, metal mirrors, etc.

The side arc milling cutter can be repeatedly ground, and when the tool is worn out, there is no need to change the tool, and the grinding service can be provided, which can 

effectively save the processing cost.