1. Danger of all indexable tools

① If the blade is not clamped to the relevant parts, it may fall off or fly out during cutting, causing injury.

② When using auxiliary tools such as universal socket wrenches, if the clamping force is too large, the blade may be broken, fall off, or fly away.

③When the tool rotates at high speed, parts and blades may fly out due to centrifugal force, which is very dangerous.

2. Protection measures

① Do not allow debris to adhere to the positioning surface and fastening parts of the blade installation. Install after careful inspection and deem it reliable.

② Use the attached special wrench to clamp the blade and parts. The special wrench is never allowed to be used for other purposes.

③Only use the attached special wrench to clamp blades and other parts. Do not use auxiliary tools such as sockets.

④Please refer to the product instruction manual and samples and use it within the recommended range. Be sure to pay full attention to safety when using it.

3. Danger of various milling cutters and other rotating tools

① Milling cutters have sharp edges and may hurt your hands if you touch them directly with your hands.

② If the tool causes chatter, vibration, etc. due to eccentric rotation, imbalance, etc., the tool may break and splash, causing injury.

4. Protection measures

① In order to prevent the bearing from rotating and vibrating due to eccentricity, the accuracy and balance of the rotating part should be checked regularly.

5. Danger of welding tools and protection measures

Danger: There is a risk of injury due to the blade falling off or breaking.

Protection measures: Make sure it is firmly welded before use. Do not use under conditions where high temperatures may occur.